for more information, please visit the product page. ????????? ?????????????????? cui .com 09/23/2014 1 of 7 series : plds100 description: led driver part number key dimming pe = pwm, 1~10 vdc, resistive d = dali blank = no dimming features ? up to 100 w continuous power ? universal input range (90~305 vac) ? single output ? dimming options: pwm, 1~10 vdc, resistive, dali ? power factor correction 0.9 ? cc and cv function ? low profile for easy installation ? ip67/ip65 rated ? over voltage, continuous short circuit, and over temperature protection ? ul 8750, iec/en61347-2-13 approval ? en61000-3-2 class c (harmonic current) approval ? efficiency up to 90% ? suitable for led lighting and signage applications plds100 - x - 277 xxx base number output current a = 8.34 a b = 4.17 a c = 2.78 a d = 2.08 a input voltage 277 = (90~305 vac) ip rating a = ip67 b = ip65 model output voltage range 1 output current vout adjustment range 2 iout adjustment range 2 output power ripple and noise 3 effciency min (vdc) max (vdc) (a) (vdc) (a) max (w) max (mvp-p) typ (%) PLDS100-A-277 6.5 12 8.34 10.8~13.2 5.3~8.34 100 120 88 plds100-b-277 13 24 4.17 21.6~26.4 2.6~4.17 100 120 89 plds100-c-277 19 36 2.78 32.4~39.6 1.74~2.78 100 120 90 plds100-d-277 26 48 2.08 43.2~52.8 1.3~2.08 100 120 90 notes: 1. constant current region 2. adjustability option only available on ip65 rated models 3. ripple and noise are measured at 95% rated current, 20mhz bandwidth with a 0.1uf ceramic capacitor and 10uf aluminum capacitor on the output. date page
for more information, please visit the product page. ?????????????????? cui .com 09/23/2014 2 of 7 cui inc series : plds100 description: led driver input parameter conditions/description min typ max units voltage 90 127 305 420 vac vdc frequency 47 63 hz current at 110 vac, 99w at 230 vac, 99w 1.1 0.55 a a inrush current at 110/240 vac, cold start, 25c 75 a leakage current at 277 vac 0.75 ma power factor correction at 115 vac/230 vac, 60~100% load 0.9 no load power consumption at 230 vac 1.5 w output parameter conditions/description min typ max units current line regulation measured from high line to low line at 90% load 1 % current load regulation measured from 10~90% load 2 % constant current accuracy 5 % voltage accuracy at 90% rated current 1 % adjustability 1 vout iout 63 10 100 % % switching frequency at 100% rated current 75 khz start-up time at 90~305 vac 2 s rise time at 90~305 vac 50 ms hold-up time at 115 vac 16 ms temperature coeffcient 0.05 %/c notes: 1. adjustability option only available on ip65 rated models via built-in potentiometer protections parameter conditions/description min typ max units over voltage protection tvs clamp, auto recovery over current protection hiccup mode short circuit protection hiccup mode, auto recovery over temperature protection 110 c safety & compliance parameter conditions/description min typ max units isolation voltage input to output, for 1 minute input to ground, for 1 minute output to ground, for 1 minute 3,750 1,875 500 vac vac vac isolation resistance 100 m safety approvals ul8750, iec/en61347-1, iec/en61347-2-13 dali iec62386-102, iec62386-207 emi/emc en55015, cispr22, en61547, en61000-3-2 class c (>60% load), en61000-3-3, en61000-4-2 criteria a mtbf as per mil-hdbk-217f, at 25c, 115 vac 160,000 hours rohs 2011/65/eu date page
for more information, please visit the product page. ?????????????????? cui .com 09/23/2014 3 of 7 cui inc series : plds100 description: led driver environmental parameter conditions/description min typ max units operating temperature see derating curves -40 70 c storage temperature -40 85 c operating altitude 2,000 m vibration 15~2000 hz, 60 min. along each x, y, and z axes 4 g mechanical parameter conditions/description min typ max units dimensions 9.134 x 1.575 x 1.102 (232 x 40 x 28 mm) inches weight 504 g ac l(brown) ac n( bl ue) fg (green /y el lo w) 2 vo+( red) vo -(bl ac k) sj tw sj tw 18awg(0. 75mm )x3c mechanical drawing units: inches[mm] tolerance: 0.02[0.5] unless otherwise specifed models with dimming ac l(brow n) ac n(bl ue) fg (green /y el lo w) di m+ (b lu e) di m-(w hi te ) vo +(re d) vo -( bl ac k) 2 sj tw 18awg(0.75mm )x3c sj tw units: inches[mm] tolerance: 0.02[0.5] unless otherwise specifed models without dimming input wire connections color function brown acl blue acn green/ yellow fg input wire connections color function brown acl blue acn green/ yellow fg output wire connections color function red vo+ black vo- output wire connections color function red vo+ black vo- blue 1 dim+/da+ white 1 dim-/da- note: 1. dali models are marked with da date page
for more information, please visit the product page. ?????????????????? cui .com 09/23/2014 4 of 7 cui inc series : plds100 description: led driver derating curves efficiency curves 100 80 60 40 20 ambient t emper ature (c) output current output current load (% ) pf th d 70 50 40 20 0 -20 -40 50% 5% 0.99 0.98 0.97 0.96 0.95 0.94 0.93 0.92 0.91 0.90 1.00 10% 15% 20% 25% 30% 35% 40% 45% 50% 60% 70% 80% 90% 100% 50% 60% 70% 80% 90% 100% 50 60 80 100 te mperature derating curve pf vs. output current thd vs. output current sa fe operating area 9 $ & 9 $ & 9 $ & 9 $ & 9 9 9 $ & 9 $ & 9 $ & 9 $ & 9 $ & 9 $ & effciency vs. output current (PLDS100-A-277) effciency vs. output current (plds100-c-277) effciency vs. output current (plds100-b-277) effciency vs. output current (plds100-d-277) output current output current output current output current effciency effciency effciency effciency date page
for more information, please visit the product page. ?????????????????? cui .com 09/23/2014 5 of 7 cui inc series : plds100 description: led driver led lighting acl (brown) power output vo+ (red) vo- (black) da+ (blue) da- (white) acn (blue) earth (green/yellow) 1. installation instructions direct connection note: output voltage of power supply must be higher than total forward voltage of series connecting led. dimming connection notes: 1. output constant current can be adjusted through output cable b y connecting 10~100 k? resistance, 1~10 vdc, or 10 v pwm signal between dim+ and dim-. 2. do not connect dim- to v-. 3. the output will shutdown when dimming is less than 1 vdc, 10 k?, or 10% pwm according to each dimming option. dali dimming connection note: output constant current can be adjusted through output cable by connecting dali controller. application notes resistance 10k 20k 30k 40k 50k 60k 70k 80k 90k 100k open output current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 95~105% voltage 1v 2v 3v 4v 5v 6v 7v 8v 9v 10v open output current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 95~105% duty cycle 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% open output current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 95~105% 10~100 k? resistance dimming 1~10 vdc dimming 10~100% pwm (10v) frequency range: 250~1000 hz led lighting acl (brown) power output vo+ (red) vo- (black) acn (blue) earth (green/yellow) led lighting acl (brown) power output vo+ (red) vo- (black) dim+ (blue) dim- (white) acn (blue) earth (green/yellow) 0~100 k resistance 1~10 vdc voltage 10 v pwm signal meet osram dali mcu controller date page
for more information, please visit the product page. ?????????????????? cui .com 09/23/2014 6 of 7 cui inc series : plds100 description: led driver 2. output voltage/output current adjustment for the plds100-x-277xxb models there are two potentiometers to adjust the output voltage/output current. each potentiometer has 11 tick marks, please refer to the below diagram and tables for specifc values. maximum output power is 100w. note: 1. all specifcations are measured at ta=25c, 115/230 vac input voltage, and 75% rated output load unless otherwise specifed. application notes (continued) a jpvu wpvu a detail view 11 10 9 8 7 6 1 2 3 4 5 11 10 9 8 7 6 1 2 3 4 5 output current (iout) tick # PLDS100-A-277xxb plds100-b-277xxb plds100-c-277xxb plds100-d-277xxb 1 8.5a 4.3a 2.9a 2.2a 2 8.5a 4.3a 2.9a 2.2a 3 8.1a 4.2a 2.8a 2.1a 4 7.7a 4.0a 2.7a 2.0a 5 7.4a 3.7a 2.5a 1.9a 6 6.8a 3.4a 2.3a 1.8a 7 6.5a 3.1a 2.1a 1.6a 8 6.0a 2.9a 2.0a 1.5a 9 5.7a 2.7a 1.8a 1.4a 10 5.2a 2.4a 1.5a 1.3a 11 5.2a 2.4a 1.5a 1.3a output voltage (vout) tick # PLDS100-A-277xxb plds100-b-277xxb plds100-c-277xxb plds100-d-277xxb 1 10.6v 21.3v 32.1v 42.2v 2 10.6v 21.3v 32.1v 42.2v 3 10.8v 21.6v 32.7v 43.4v 4 11.0v 22.0v 33.5v 44.3v 5 11.4v 22.7v 34.5v 45.5v 6 11.7v 23.5v 35.4v 47.4v 7 12.1v 24.2v 36.7v 49.0v 8 12.5v 25.0v 37.6v 50.0v 9 12.8v 25.6v 38.6v 51.2v 10 13.3v 26.6v 40.0v 53.5v 11 13.3v 26.6v 40.0v 53.5v date page
for more information, please visit the product page. ????????? 09/23/2014 7 of 7 cui inc series : plds100 description: led driver cui offers a two (2) year limited warranty. complete warranty information is listed on our website. cui reserves the right to make changes to the product at any time without notice. information provided by cui is believed to be accurate and reliable. however, no responsibility is assumed by cui for its use, nor for any infringements of patents or other rights of third parties which may result from its use. cui products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safet y or effectiveness. headquarters 20050 sw 112th ave. tualatin, or 97062 800.275.4899 fax 503.612.2383 cui .com techsupport@cui.com rev. description date 1.0 initial release 09/23/2014 the revision history provided is for informational purposes only and is believed to be accurate. revision history date page
|
